6^th International Conference MICROSCOPY AND NON-DESTRUCTIVE MATERIAL TESTING 2020

19. – 22. 10. 2020 Castle hotel Hrubá Skála – Turnov

Detailed timetable for the conference with precise timing arrangement of individual contributions and the lectures will be distributed in III. Circular Letter to 8. 10. 2021.

During the first and second day will also run a competition for
"The most beautiful material structure picture"

The "Best Picture of the Material Structure" Competition

Competition will be held in two categories namely in the field of colour photography and in the field of black and white photography. Each participant may submit max. 3 colour and 3 black and white photographs of material structure (it is possible to participate in only one of these categories). Photos can be in size max. A4. Each photograph is then needed to describe: zoom, 1 - 2 sentence description of the structure, method of etching and observation.

Photos will be posted during the first day of the conference and will be evaluated by the Competition Commission and the participants (Vox Populi). The winners will be awarded with prizes. Awards will be presented at the social evening of the conference. Photo images should be sent no later than 10. 10. 2021 to the contact address.

It is also possible to bring the photo in advance, by prior arrangement and sending the necessary information in advance, by e-mail, to the conference venue. The photo must be handed over on the first day of the conference no later than the next morning to be posted and can be judged fairly.

Preliminary summary of lectures

Abdallah SabrinTU v Liberci

Biogenic Synthesis of Iron Oxide Nanoparticles

Andršová ZuzanaTU v Liberci

EBSD Study of Microstructure of Cold Drawn Seamless Tubes

Benediková AlexandraTU v Liberci

Synthesis of Lu2O3 - Bi2O3 Nanoparticles

Beneš PetrZČU v Plzni

Selected NDT Techniques in Heat Treatment Control

Beránek LiborČVUT v Praze

Use of Computed Tomography in Dimensional Quality Control and NDT

Bricín DavidZČU v Plzni

The Structure and the Properties of the Boride Layers of the Various Types of Technically Important Materials

Bunda ZbyněkZČU v Plzni

Analysis of Gear Damage to Cross Racing Motorcycles

Cieslar MiroslavUniverzita Karlova

Phase Transformations in New Al-Li Based Alloys Prepared by Twin-roll Casting

Čapek JaroslavFyzikální ústav AV ČR, v.v.i.

Using of Electron Microscopy for the Investigation of a ZnMg0.8Sr0.2 Alloy Processed by ECAP

Dám KarelOLYMPUS CZECH GROUP, S.R.O., ČLEN KONCERNU

Olympus DSX1000 Microscope - What's New in Microscopy

Dudák MichalANAMET s.r.o.

Automatic Analysis of Nonmetallic Inclusions in Steel by Desktop SEM Phenom Particle X

Dvorský DrahomírVŠCHT Praha

Microstructure, Mechanical and Corrosion Properties of Extruded Milled Magnesium Powder

Gávelová PetraCentrum výzkumu Řež s.r.o.

Microstructure of Zirconium Fuel Claddings: TEM and EBSD Studies of As-received and Neutron-irradiated Materials

Hren IrynaFSI UJEP

Analysis of the Influence of Surface Condition on the Corrosion Behavior of Alloy 2024

Kejzlar PavelTU v Liberci

The Comparison of Antibacterial Effect of CuO Doped into Nanofibers in Form of Nanoparticles vs. RF-PACVD/MS

Knaislová AnnaVŠCHT Praha

Preparation of the Ti-Al-Si with the Low Content of Silicon by Powder Metallurgy

Kolská ZdeňkaPřF UJEP

BET and BJH Analyses of Surface Area and Porosity, Other Non-destructive Methods for Material Characterization

Koreček DavidTU v Liberci

Numerical Simulation as a Tool to Predict Sheet Metal Forming Process of TRIP Steel HCT690

Krištofová PatríciaVŠCHT Praha

Additive Manufacturing Magnesium Alloy WE43 - by Selective Laser Melting Method

Kroisová DoraTechnická univerzita v Liberci

The Use of FIB for the Preparation of a Structure Analogous to the Natural Surface and Its Replication by Selected Types of Polymers

Kučera VojtěchVŠCHT Praha

Resistance Spot Welding of Martensitic Steel with Zinc Coating: Possible Risk of Liquid Metal Embrittlement

Kučerová LudmilaZČU v Plzn

Characterisation of the Joints of 3D Printed Maraging Steel Deposited on Conventional Maraging Steel

Kubásek JiříVŠCHT Praha

Zinc Alloys as Prospective Materials for Biodegradable Medical Devices

Lejček PavelVŠCHT v Praze

Multiscale Characterization of Microstructure of Iron Produced by Selective Laser Melting

Mamoň FilipÚstav anorganické chemie AV ČR, v.v.i.

Development and Analysis of Advanced Hybrid Nanolaminates Based on Ternary Mn+1AXn and Binary MXene for Applications in Extreme Conditions

Mareš JakubÚstav anorganické chemie AV ČR, v.v.i.

Development of Nanocomposite Material Based on TiO2 and Graphene

Michalcová AlenaVŠCHT Praha

Kinetic of The Intermetallic phases growing in the Al alloy – Ni composite

Michna ŠtefanFSI UJEP

Current Trends in Nano and Micro Coating

Müller MiroslavČZU v Praze

Research on Hybrid Adhesive Bonds with Filler Based on Coffee Bean Powder Exposed to Cyclic Loading

Novák PavelVŠCHT Praha

Microstructure of the Alloys Prepared by Reduction of Deep Sea Nodules by Aluminium and Silicon

Petržílková MichaelaTU v Liberci

ZnO NPs Based Photocatalytic Coating with Enhanced Antimicrobial Activity

Petřík MilanOLYMPUS CZECH GROUP, S.R.O., ČLEN KONCERNU

New Ultrasound Technique TFM and Its Application in Practice

Průcha VojtěchZČU v Plzni

Influence Of Deep Cryogenic Processing On Carbide Grain Size In Sintered Carbide WC-Co

Roudnická MichaelaVŠCHT Praha

Biomedical Titanium Alloy Prepared by Additive Manufacturing: Effect of Processing on Tribology

Salvetr PavelCOMTES FHT

Influence of Si and Cu content on properties of 54SiCr6 steel

Seibert OndřejTU v Liberci

Modification of Motor Oil 10W-40 Lubrication Properties

Sobotka JiříTU v Liberci

Accuracy Comparison of the Optical 3D Scanner and CT Scanner

Strakosova AngelinaVŠCHT Praha

Influence of Elevated Temperatures on the High Strength X3NiCoMoTi 18-9-5 Maraging Steel Behavior

Sviantek JanFSI UJEP

Selected Aspects of Metal Boriding

Szabó MatúšTU v Košiciach

Microscopic Evaluation of ZnO Produced from Waste

Šerák JanVŠCHT Praha

The Influence of Thermal History on the Microstructure and Mechanical Properties of AlSi8Cu2Fe Alloy

Šramhauser KarelFSI UJEP

Using of the Electron Microscope to Evaluate the Wear of Major Flank Face and Rake Face of Indexable Cutting Insert

Švorčík VáclavVŠCHT Praha

New technologies - an opportunity for industry and for people

Ťavodová MiroslavaTU ve Zvolene

Possibilities of Modification of Mloughshares to Increase Service Life Used for Winter Maintenance of Forest Roads

Voňavková IlonaVŠCHT Praha

Characterization of β-Ti Alloy Prepared by SLM Method